GAI-Tronics 12562-103 SMART Emergency Phone PCBA Replacement Kit - Manual (Page 4)

Pub. 42003-198B
M ODEL 12562-103 S.M.A.R.T. E MERGENCY T ELEPHONE PCBA R EPLACEMENT K IT Page: 4 of 4
f:\standard ioms - current release\42003 kit manuals\42003-198b.doc
04/09
2. Use the screws (from step 4 in the previous section) to secure the PCBA.
3. Reconnect the red (ring) and green (tip) telephone wires to the PCBA.
4. Reconnect the microphone, speaker, switches, LED indicator, and keypad cable (Model 298-003 only)
to the board.
5. Use the Model 233-001 Tamper-Resistant Screwdriver to install six front panel screws.