GAI-Tronics 12803-001 RigCom PCBA Replacement Kit - Manual

Pub. 42003-214B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
RigCom PCBA Replacement Kits
Models 12803-001, 12803-002, 12803-003
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12803-001, 12803-002, and 12803-003 RigCom PCBA Replacement Kits are intended for
replacing the printed circuit board assembly (PCBA) in the following GAI-Tronics RigCom units:
Kit Model RigCom Model
12803-001 400-001, 400-002NS
12803-002 400-003
12803-003 400-004
These kits include the following components:
Qty Description
1 RigCom PCBA
1 Spacer, 1/2-inch nylon
Installation
1. Remove the 12 bolts from the front of the enclosure. Open the front cover.
2. Unplug the cable assembly from the PCBA in the rear of the enclosure. Set front cover aside.
3. Unplug the 2-position connector for the speaker wires.
4. Unplug the 2-position connector for 12 V dc power and the 3-position connector for ac power.
5. Unplug the 9-position connector for footswitch, audio external control and auxiliary microphone
wires.
6. Remove the four screws from the PCBA.
7. Remove the old PCBA from the rear enclosure.