GAI-Tronics 12520-008 Red Push Button Sealing Boot Kit - Manual (Page 2)

Pub. 42003-215A
M ODEL 12520-008 R ED P USH B UTTON S EALING B OOT K IT Page: 2 of 2
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-215a.doc
11/06
5. After the sealing boot is in place and the emergency button activates (the clicking sound will be heard
when it is pushed), hold the button by the rim and replace the button in the front panel.
6. Replace the gray retaining ring, and then the black collar containing the set screws. Tighten the black
collar and the set screws. Retest the button to ensure a vacuum did not develop upon insertion. If a
vacuum has developed preventing activation, disassemble the button and repeat from step 5.
7. Replace the front panel with the four mounting screws.