GAI-Tronics 10438-101 Intrinsically-Safe Microphone Barrier Kit - Manual (Page 2)

Pub. 42003-237B
M ODEL 10438-101 Intrinsically-Safe Microphone Barrier Kit Page 2 of 6
e:\standard ioms - current release\42003 kit manuals\42003-237b.doc
04/14
Mounting
Mount the enclosure using the four 0.28-inch (7-mm) diameter holes located on the mounting flanges
with 5/16-inch (M6) hardware. One M20 thru hole is provided on the left and right sides of the enclosure.
The suggested mounting height for the enclosure is 48 inches (1219 mm) to the center of the bottom
mounting holes of the enclosure.
Refer to Figure 1 for mounting dimensions.
Figure 1. Model 10438-101 Microphone I.S. Barrier Kit Mounting Details
WARNING
Insure proper grounding to protective earthing.
Do not disconnect equipment while energized.
After all wiring and cable connections have been completed, place the front cover on the rear enclosure,
being careful not to pinch any cables. Secure the front cover using the four screws and washers provided.
Torque the screws to 50 in-lbs (5.65 N-m).