GAI-Tronics 12565-701, 12565-702, 12565-802 VoIP and VoIP WiFi PCBA Replaement Kits User Manual

Voip and voip wifi telephone pcba replacement kits, Confidentiality notice, General information

Advertising
background image

Pub. 42003-263B

GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA

610-777-1374

 800-492-1212  Fax: 610-796-5954

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

G A I - T R O N I C S ® C O R P O R A T I O N

A H U B B E L L C O M P A N Y

VoIP and VoIP WiFi Telephone PCBA

Replacement Kits

Models 12565-701, -702, & -802

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.

General Information

The Model 12565-701, -702, and -802 VoIP and VoIP WiFi Replacement Kits contain two
interconnected circuit board assemblies (Carrier and VoIP) which serve as replacement for the PCB
assemblies found in the GAI-Tronics VoIP Telephones listed in Table 1 below.

Table 1. Model Chart

Kit Model

Applies to GAI-Tronics Telephones:

12565-701

226-700, 246-700, 256-700, and 276-700 VoIP Telephones

12565-702

393-700, 393AL-700, 394AL-702, 397-700, 397-701, 398-701, and 398-702 VoIP
Hands-free Telephones

12565-802

393-800A, 393AL-800A, 394AL-802A, 397-800A, 398-801A, and 398-802A VoIP
WiFi Hands-free Telephones


Electrostatic Discharge (ESD) Protection:

Your telephone may have an earth ground terminal provision. If so, ensure that it is connected to ground
in accordance with all local safety regulations and the National Electrical Code (NEC). Grounding has to
be ensured for safe and stable communications. Do not use long and coiled ground wires. Trim ground
wires to the required length. Use a star configuration whenever possible.

Advertising