GAI-Tronics XCP0010A DC Control Kit - Manual

Pub. 43003-012B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 n 800-492-1212 n Fax: 610-775-6540
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model XCP0010A DC Control Kit
Field Installation Kit Instructions
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The XCP0010A DC Control Kit for the ICP9000 Series Desktop Console or the ICP9000 Navigator
Series MCU provides standard dc control on a per channel basis. One XCP0010A kit is required for each
dc-controlled radio channel.
The XCP0010A DC Control Kit includes the following components:
Qty Description
1 CDC printed circuit board
3 #4-40
×
¼-inch Phillips SEM screw
Installation
ICP9000 Series Desktop Console
1. Disconnect power from the ICP9000 Series Desktop Console.
2. Remove the 7 screws securing the top panel and gently lift the cover exposing the attached speaker
cable and master display cable. See Figure 1 on page 2.