GAI-Tronics XCP0140A Headset Interface Kit - Manual

Pub. 43003-025B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 n 800-492-1212 n Fax: 610-775-6540
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model XCP0140A Headset Interface Kit
Field Installation Kit Instructions
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model XCP0140A Headset Interface Kit for the ICP9000 Series Desktop Console or the ICP9000
Navigator Series MCU provides a connection for the XHS003A Headset. The kit includes the following
components:
Qty Description
1 Headset Interface assembly
2 #10-32 Phillips screws
Installation
ICP9000 Series Desktop Console
1. Mount the headset interface assembly to the right side of the ICP9000 Series Desktop Console by
attaching it with the supplied #10-32 screws to the underside of the unit. See Figure 1.
2. Plug the modular connector into the rear of the console at the H EADSET /H ANDSET jack.