GAI-Tronics SPK200 Solar Panel Interface Kit - Manual

Pub. 43003-039A
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Solar Panel Interface Kit
Model SPK200
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model SPK200 Solar Panel Interface Kit is designed for use with GAI-Tronics Model RFP7784-108
Solar Panel (30 watt) and Model XB001 External Weatherproof Long-Life Battery Kit.
The Model SPK200 Solar Panel Interface Kit includes the following components:
Qty Description
1 Cable bushing
1 Terminal block, 2-point
1 Battery charge regulator
2 Screws, #6-32
× 0.500-inch
4 Screws, #6-32
× 0.187-inch
1 Solar kit wiring harness
1 Mounting Kit
Installation
Installing the Model RFP7784-108 Solar Panel Array
1. Remove the Model RFP7784-108 Solar Array Panel from the shipping package.
2. Mount the solar panel to the bracket using the provided hardware. Instructions are included with
30LT HPM mounting kit.
3. Install the mounting kit to the desired surface. If surface mounting, two lag screws or bolts are
required. If pole mounting, hose-clamps or U-bolts (up to 4-inch diameter) are required.
4. Route the cable attached to the panel into the Model XB001 Battery Enclosure.