Gullco GK-200-RLx-I - Manual (Page 4)

2
SAFETY PRECAUTIONS
The following cautionary/warning label is attached to each “KAT”
®
carriage:-
The above label pictorially represents the following:
“Warning:-
Read the manuals before turning the unit on and before performing service.
Also, positively disconnect the unit from all power supplies before servicing!”
IMPORTANT
READ THIS BEFORE OPERATING THE “KAT”
®
CARRIAGE INDEXING SYSTEM
When used with electric arc welding or cutting equipment, ensure that an adequate and well-
maintained power return path is provided with good electrical contact. Failure to do so may result in
the welding/cutting current passing through the carriage and damaging the wiring and electrical
components.
Important information regarding safety and operation of the “GSP” motor controls used in the
“KAT”
®
carriage indexing system is contained in a supplemental manual attached at the end of the
Technical Manual. It is equally important to read, understand and apply the information contained
within that manual. The supplemental manual (GD-031) has a title “Technical Information For The
Gullco “GSP” Micro-Processor Based, 24 Volt DC Motor Control”, and it’s pages are numbered with
a prefix of “T-“.
ALL THE SAFE PRACTICES AND PRECAUTIONS MAY NOT BE GIVEN IN WRITING. SOME
ARE BASED ON COMMON SENSE, BUT OTHERS MAY REQUIRE TECHNICAL
BACKGROUND TO EXPLAIN.