Highgear TerraPod - Manual (Page 5)

E
N
G
LI
SH
4
TImE / DATE mode Settings
Setting TImE on your unit
1. Press TIME to navigate to TIME mode.
2. Press and hold TIME to enter settings.
3. Press ALTI / + or BARO / - to change setting.
4. Press TIME to confirm and move to the next setting.
The setting options are as follows:
5. Press TIME to confirm.
NOTE: If no key is pressed for 30 seconds, the display will return to previous mode.
Time Mode Display Year
Done Display
12 / 24-hour time Hour / Minute
Month / Day Day-Month / Month-Day
Temperature F˚ / C˚
Altitude/Barometer Measurement Units
Setting ALARm on your unit
1. Press TIME to navigate to Alarm mode.
2. Press and hold TIME to enter settings.
3. Press ALTI / + or BARO / - to change setting.
4. Press TIME to confirm and move to the next setting.
The setting options are as follows: hour; minute; alarm ON / OFF.
5. Press TIME to confirm.
NOTE: Indicates that the alarm has been activated.
NOTE: When the alarm clock is activated, it will sound at the set time every day.
Press any button to stop the alarm for that day. The alarm clock is still active
and will set off again the following day.
ALARm mode Settings