HiTi P910L User Manual - Manual (Page 12)

Chapter 2. Installing and Set Up
9
Warning: When moving the printer, make sure to turn off the power of
the printer, remove the power cable in order to have no connection with other
devices. Otherwise, the power cable might be damaged and it can cause the fire and
electric shock. Also there is a possibility to fall down caught by the cable.
Attention: To remove the USB cable, make sure that the printer is in the
waiting status. Removing the USB cable during data transfer may not be able to
print data correctly.
Warning: In case of not using the printer for a long time, remove the
power cable for safety.
Warning: Avoid “piled up” connection. It can cause the fire and electric
shock.
Connecting USB Cable
Connect the USB cable from the personal computer to the USB connector
located on the left rear side of the printer. Be sure to insert the USB cable
all the way.
Connecting Personal Computer
１． Visit the following website, and download the Printer Driver from
HiTi P910L Driver Download. http://www.hiti.com
２． Follow the installation instructions which is contained in the
printer driver package, install the printer driver on your personal
computer.