HiTi P910L User Manual - Manual (Page 18)

Chapter 3. Routine Maintenance
15
3. Using gauze dipped with
isopropyl alcohol or ethyl
alcohol, clean the rubber section
of the platen roller.
Attention: Printing should be performed after the alcohol dried up completely
(approx. 5 minutes)
Cleaning of Outer Cover
Wipe the printer outer cabinet with a soft cloth. If the stains are not
removed, wet the cloth and apply weakened neutral Detergent to it.
Warning: In case, the foreign substance get into the printer, turn off
the power of printer, remove the power cable and contact the dealers or service
center. Continuous use of the printer under such condition can cause the fire and
electric shock.
Warning: Continuous use under the abnormal condition such as high
temperature, smoke and strange smell can cause the fire and electric shock. Turn
off the power and make sure to remove the power cable, then contact the dealers
or service center.
Caution: Do not use volatile solvents or spray insecticide on the printer
outer cabinet. Otherwise, discoloration or crack may result.
Platen