Hypertherm PAC500 Water Injection Plasma Cutting System - Manual (Page 24)

2-4 PAC500 Instruction Manual
4
SPECIFICATIONS
Model H401 Power Supply
Refer to H401/H601 power supply instruction manual 800410.
Model H601 Power Supply
Refer to H401/H601 power supply instruction manual 800410.
Argon-Hydrogen Manifold
Electrical Input .................................................120 VAC, 50/60 Hz
Plasma Gas Supply .........................................65% Argon-35% Hydrogen:
260 cfh to 300 cfh @ 150 psi
Dimensions
Width................................................................5 in.
Height...............................................................10 in.
Depth ...............................................................5 in.
Water Supply (single torch)
Input Voltage ....................................................230/460 volts, 3 phase
Input Current ....................................................6.0/3.0 amperes
Rated Pump Output .........................................2.5 gpm at 175 psi
Dimensions
Width................................................................10 in.
Height...............................................................24 in.
Length ..............................................................26 in.
Weight..............................................................90 lbs.
Water Supply (two torch)
Input Voltage ....................................................230/460 volts, 3 phase
Input Current ....................................................9.2/4.6 amperes
Rated Pump Output .........................................5.0 gpm at 175 psi
Dimensions
Width................................................................10 in.
Height...............................................................24 in.
Length ..............................................................26 in.
Weight..............................................................115 lbs.