Alcatel Idol 3 6039 S - Manual (Page 10)

17 18
1�2�2 Power on your phone
Hold down the Power key until the phone powers on, unlock your phone
(Slide, PIN, Password, Pattern or Face unlock) if necessary and confirm. The
Home screen is displayed.
If you do not know your PIN code or if you have forgotten it, contact your
network operator. Do not leave your PIN code with your phone. Store this
information in a safe place when not in use.
Set up your phone for the first time
The first time you power on the phone, you should set the following
options:
• Select the phone's language, then touch .
• Select an enabled Wi-Fi then touch NEXT, otherwise touch SKIP�
• Set up Google Services by marking the corresponding checkboxes, touch
MORE to learn more about Google Services, then touch NEXT.
• Set up Location service after switching the toggle for Location, then
select the desired location mode.
• Touch FINISH to complete the setup process.
Even if no SIM card is installed, your phone will still power on and you will
be able to connect to a Wi-Fi network, (refer to section “6�1�2 Wi-Fi”),
sign into your Google account and to use some features.
1�2�3 Power off your phone
Hold down the Power key from the Home screen until the phone options
appear, select Power off.
1�3 Home screen
You can bring all the items (applications, shortcuts, folders and widgets) you
love or use most frequently to your Home screen for quick access. Touch
the Home key to switch to the Home screen.
Before you install or remove the SIM card or microSD card, insert the SIM
card tool provided into the small opening on the side of the device. The
SIM/microSD card tray will pop out.
Your phone only supports micro-SIM cards. Do not attempt to
insert other SIM types like mini and nano cards; otherwise this may
cause damage to your phone.
Charging the battery
Connect the battery charger to your phone and wall socket respectively,
the LED indicator will light while charging.
You are advised to fully charge the battery ( ). Charging status is
indicated by a percentage displayed on screen while the phone is powered
off. The percentage increases as the phone is charged.
To reduce power consumption and energy waste when the battery
is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when
not in use; reduce the backlight time, etc.