Alcatel Idol 3 6039 S - Manual (Page 21)

39 40
• Touch the icon .
• Then touch the icon and then touch the icon to start the
conference.
• Touch to end the conference call and disconnect all callers.
3�1�7 Call settings
Touch from the Call screen, then touch Settings. The following options
are available:
General settings
• Contact display options: Touch to sort the list by the first name or
last name, as well as viewing contact names by first/last name first.
• Sounds and vibrate: Touch to set incoming call ringtone, mark the
checkbox to enable dial pad tones or vibrate for calls.
• Other/Quick Responses: Touch to edit quick responses which will be
used when you reject a call with messages.
Call settings
• Voicemail
- Service: Opens a dialog box where you can select your carrier’s
voicemail service or another service.
- Setup: If you are using your carrier’s voicemail service, this opens
a dialog box where you can enter the phone number to use for
listening to and managing your voicemail. You can enter a comma (,)
to insert a pause into the number — for example, to add a password
after the phone number.
- Sound: Touch to set the sound when a new voicemail arrives.
- Vibrate: Mark the checkbox to enable vibration when a new
voicemail arrives.
Call barring: Touch to configure Call barring settings. Mark the check
box to activate the call barring for outgoing and incoming calls.
Fixed Dialing Numbers: Fixed dialing number (FDN) is a SIM service
mode, where outgoing calls are restricted to a set of phone numbers.
These numbers are added to the FDN list. The most common practical
application of FDN is for parents to restrict the phone numbers to which
their children can dial. For security reasons, you’ll be prompted to enable
FDN by entering SIM PIN2 which is usually acquired from your service
provider or SIM maker.
Service Dialing Numbers: You can place a call from the SDN list.
Call forwarding: Touch to configure how your calls are forwarded
when you are busy, unanswered or unreachable.
Additional settings
- Caller ID: Touch to use default operator settings to display your
number in outgoing calls.
- Call waiting: Mark the check box to notify you of new incoming
calls during a call.
• TTY mode: TTY mode can be used by people who are deaf, have poor
hearing or speech impairments.
• Hearing aids: Hearing aid mode can be used by people who are deaf,
have poor hearing or speech impairments. After connecting the phone
and hearing aid device, calls are linked to a relay service, which converts
incoming speech to text for the person using the hearing aid and
converts outgoing text from the hearing aid device to a spoken voice for
the person on the other end of the conversation.
• DTMF Tones: Dual Tone Multi-Frequency, or DTMF is a method for
instructing a telephone switching system of the telephone number to be
dialed, or to issue commands to switching systems or related telephony
equipment. Touch to enable DTMF tones.
3�2 Call log
You can access your call memory by touching RECENTS tab from the
Call screen to view Missed calls, Outgoing calls and Incoming calls.