IBASE MI980 - Manual (Page 50)

BIOS SETUP
46 MI980 User’s Manual
Graphics Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Graphics Configuration
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
IGFX VBIOS Version 2166
IGfx Frequency 800 MHz
Primary Display
Primary PEG
Primary PCIE
Auto
Auto
Auto
Internal Graphics Auto
Aperture Size 256MB
DVMT Pre-Allocated 64M
DVMT Total Gfx Mem
Primary IGFX Boot Display
LVDS/EDP Control
Gfx Low Power Mode
256MB
VBIOS Default
Disabled
Disabled
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary
display or select SG for switchable Gfx.
Primary PEG
Select PEGO/PEG1/PEG2/PEG3 Graphics device should be Primary
PEG.
Primary PCIE
Select PCIE0/PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE6PCIE7
Graphics device should be primary PCIE.
Internal Graphics
Keep IGD enabled based on the setup options.
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by
the internal graphics device.