IBASE MI946 - Manual (Page 48)

BIOS SETUP
44 MI946F User’s Manual
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
ME Subsystem Configuration
Disabled
Enabled
<- Select Screen
↑↓ Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
BootBlock HECI Message [Enabled]
HECI Message [Enabled]
End Of Post S5 HECI Message [Enabled]
ME HECI Configuration
ME-HECI [Enabled]
ME-IDER [Enabled]
ME-KT [Enabled]
BootBlock HECI Message
This configuration is supported only with MI946AF (with iAMT
function).
This option allows you enable or disable HECI message when
booting up the system..
HECI Message
This configuration is supported only with MI946AF (with iAMT
function).
This option allows you to enable or disable the HECI message.
End Of Post S5 HECI Message
This configuration is supported only with MI946AF (with iAMT
function).
This option allows you to enable or disable HECI message
when the system is in the off (S5) state.
ME-HECI
This configuration is supported only with MI946AF (with iAMT
function).
This option is enabled by default and cannot be changed.
ME-IDER
This configuration is supported only with MI946AF (with iAMT
function).
This option is used to enable or disable the IDE-Redirection
(IDE-R) function on an AMT-capable system.