IBASE IB898 - Manual (Page 6)

INTRODUCTION
2 IB898 User’s Manual
Specifications
Product Name IB898 [default silk screen model # on PCB is IB898]
Form Factor 3.5
” disk size SBC
SoC Type/Speed Intel® Atom TM DC E3825 /1MB cache/1.33 GHz (IB898-I25)
Intel® Atom TM SC E3815 /512KB cache/1.46 GHz (IB898-I15)
FCBGA1170,Type-3, 25mmx27mm, 22nm,Tj= -40ﾟC to +110ﾟC ;
**All SoC Skus will be on D-0 stepping »
BIOS AMI BIOS
Memory Intel ® Atom TM SoC integrated memory controller, supports
DDR3L(1.35V) only; 1x DDR3 SO-DIMM socket;
Max. DDR3L-1066@4GB (Non-ECC, Un-buffered)
VGA Intel® Gen7 w/ 4 EUs graphics engines (Gfx freq @542MHz/792MHz
[Turbo]); Supports DX 11, OGL 3.0, OCL 1.1, OGLES 2.0,
DisplayPort x 1 [Support to 2560x1200@60Hz]
CRT x 1 [Support to 1920x1080@60Hz]
LVDS 24-bit dual channel via NXP PTN3460 thru eDP
[Supports up to 1920x1200@60Hz]
LAN Intel I210IT PCIe Gigabit LAN [9x9mm @64-QFN , -40ﾟC to +85ﾟC]
USB Intel® Atom TM SoC built-in USB host controller
Support USB 2.0 x 4 ports; USB 3.0 x 1 port,
USB 2.0 Hub x 4 ports (Thru Renesas uPD720115K8)
Serial ATA Ports Intel® Atom TM SoC built-in SATA II controller, supports 2 ports
Audio Intel ® Atom TM SoC built-in HD Audio controller + Realtek ALC269QHD
Codec w/ class-D speaker amplifier(2.3W per channel @ 5V P/S)
[7mm x 7mm @ 48-QFN] ; support 2-channel audio out + amp
LPC I/O Nuvoton NCT5523D [64-pin LQFP, 7x7x1.4mm]
COM #1 (RS232/422/485) [EXAR SP339EER1 x 1 for jumper-less]
COM #2 (RS-232 only)
Hardware Monitor: 2x Thermal inputs; 2x Voltage monitoring
Digital IO 4 in & 4 out
Expansion Slots Mini PCI-e socket x3 (2x Full-sized + 1x Half-sized, all with USB signal
from USB Hub) **Full-sized MiniPCIe(1x) # 1 support mSATA also **
Edge Connector DB9 for COM1, DB15 for VGA, DisplayPort, RJ45 for GbE LAN
USB 2.0 vertical connector x 1 (from SoC)
USB 3.0 vertical connector x 1 (from SoC)
Onboard
Header/Connector 2x4 header for front panel (PWR, LED, RESET)
DF11 2x4 header for 2x USB 2.0 (from USB Hub)
DF20 socket connector x2 for 24-bit dual channel LVDS
4-pin box header for backlight/brightness control (PWM mode)
DF11 2x6 box header x1 for Audio; 4-pin box header for speaker
DF11 2x5 box header for COM2
2x5 pin header for LPC (80-port card debugging purpose)
Mini PCI-e(1x) connector x3
SATA connector x2 for SATA device
4-pin power connector x2 (JST type, For SATA device)
2-pin connector 1 for power input
Watchdog Timer Yes (256 segmen
ts, 0, 1, 2…255 sec/min)
Power Connector 12V only DC-in thru onboard 2-pin connector
Others iSMART 3.1 [EuP/ErP ; Auto-scheduler ; Power resume]
Heat-spreader / Heatsink for fanless purpose
Mounting holes for heatsink / heat spreader are at least 5 holes
OS supporting - Windows 8.1 / Embedded; Windows 7 / Embedded; Linux
RoHS 2.0 / CE
/FCC/ LVD Yes / Yes / Yes / Class B
Operating system -40ﾟC to +85ﾟC
Board Size 102mm x 147mm