IBASE IB960 - Manual (Page 12)

INSTALLATIONS
8 IB960F User’s Manual
Setting the Jumpers
Jumpers are used on IB960F to select various settings and features
according to your needs and applications. Contact your supplier if you
have doubts about the best configuration for your needs. The following
lists the connectors on IB960F and their respective functions.
Jumper Locations on IB960F ............................................................... 9
JP1, JP2, JP3: RS232/RS422/RS485 (COM2) Selection .................... 10
JP4: COM2 RS232 RI/+5V/+12V Power Setting ............................... 10
JP5: COM1 RS232 RI/+5V/+12V Power Setting ............................... 10
JP7: ME TLS DISABLE/ENABLE (Factory use only) ...................... 10
JP8: Flash Descriptor Security Override (Factory use only) ................ 11
JP9: LVDS Panel Power Select.......................................................... 11
JP10: Backlight Adjust ...................................................................... 11
JP11: PWM voltage setting(Factory use only) ………………………11
JP12: SRTC RST#(Factory use only) ................................................. 11
JP13: Backlight Enable ...................................................................... 12
JP14: ATX or AT (Emulation) Mode Selection.................................. 12
JBAT1: Clear CMOS Contents .......................................................... 12