IBASE ASTUT-XX1-PC1S User Manual
Page 21
Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
13
IBASE Technology Inc.
LPC I/O
F81866AD-I (128-pin LQFP [14mm x 14 mm])
-
COM #1 (RS232/422/485) RS-485 with AFC
-
COM #2 (RS232/422/485) RS-485 with AFC
-
COM #3 (RS232 only, supports ring-in with power @500 mA, z
-
jumper selectable for 5V or 12V)
-
COM #4 (RS232 only) pin header
-
COM #5 (RS-232 for touch)
[Hardware Monitor]
2 x Thermal inputs
2 x Voltage monitoring
1 x Smart fan DC mode
Digital IO
-
4 GPIO (2in/2out), 1 x 5V Vcc and 1 Ground [thru edge connector @ 1x6 pins
Terminal block type], not TTL with circuit protection
5V Vcc has count-current protection
-
4 GPIO(2in/2out) and Ground (header), not TTL with circuit protection
Expansion Slots
1 x Mini PCI-e socket x 1, Full/Half-sized type
1 x CFast
Edge Connector
GPIO (2in/2out)/VCC/Ground 1x6 pins terminal block
RJ45 x 2 for GbE LAN, 2 connector for 2 port
DB9 x 1 for COM1 (isolated)
DB9 x 1 for COM3
USB 2.0 connector x 4 for USB1~4, 2 connectors for 4 ports
3 pins terminal block (+/G/-) for power input
Line out microjack x 1
Mic-in microjack x 1
CFast socket x 1
Power LED SMD type, power on is green else no light
On Board
Headers/
Connectors
2 ports x SATA II, SATA #2 shared CFast via NXP CBTL02043ABQ switch
4 pins power connector x 2 for SATA HDD
1 x DF-11 10 pin header for COM2
1 x DF-11 10 pin heard for COM4
1 x DF-11 10 pin header for VGA
1x8 pins DF-11 header x 1 for 2 ports USB 2.0
2x DF20G-20DP connector for 24-bit Single/Dual channel LVDS
2x5 pins headers x 1 for LPC (Debug purpose only)
Mini PCI-e(1x) connector x 1 [Full/Half-sized]
1 x 5 2.0mm pins box header connector for 5 wire touch
1 x 4 2.5mm pins connector for L&R speaker out
1 x 7 pins box header for LCD backlight control
12V(1.5A)/12V(1.5A)/PWM/Backlight0~5V(500mA)/3.3V(500mA)/GN/GN)
1 x 5 pins box header for smart battery (RST/EXTSMI/Ground/DATA/CLK)
1 x 5 pins box header for GPIO, 2in/2out/Ground, not TTL
1 x 2 pins connector for RTC battery
1 x 3 pins connector for system smart fan DC type
1 x 8 pins header for Power on-off/reset/Power LED/HDD LED
Watchdog Timer
Yes (256 segments, 0, 1, 2…255 sec/min)
Power Connector
+12V(-10%)~+36V(+5%) DC-input
RoHS
Yes
Board Size
Customized
Golden Finger
PCIe x 16 golden finger for PCI (124P) and PCIe x1 (36P) signal
Touch controller
Onboard Penmount 6000 USB/RS-232 selectable by jumper, default RS-232
Others
1. CPU & NM10 PCH are located at back side
2. No chemical capacitor on board
3.
-20~60°C Operating temperature