IBEA IBT-500 Series - Manual (Page 27)

Minitransporter IBT-500R / H / DH/ DHZ Pag. 27
DRIVING DEVICE
NAMES OF THE PARTS
FUNCTION OF THE PARTS
Throttle lever.......................Increases and decreases engine speed.
Side clutch levers................For changing directions. The unit turns toward the side on which the
clutch lever is pulled. If both the left and right levers are operated
simultaneously, the unit will come to an immediate stop.
Deadmanʼs control
clutch lever..........................Engage and disengages engine rotation from the transmission.
Depressing the lever is “Drive” mode and releasing lever is “Stop”
mode. Since this lever is connected to brake, the parking brake is
engaged automatically when releasing the lever.
Gearshift lever ....................For selecting driving speed. When changing gears, please do so
with the travel clutch in the “Stop” position and the unit stopped.
Dump lever .........................For dumping the bed. Pulling the lever releases the bedʼs locking
device.
Throttle lever
Stop switch
Side clutch levers
Gear shift lever
Deadmanʼs control clutch lever
Dump lever
Note: References to “left” and “right” refer to the operatorʼs point of view behind the
handlebars during operation.
IBT500 REIMPAGINATO.indd 27 30/06/14 11.00