IHSE USA 480c Series Draco tera compact - Manual (Page 101)

Configuration
2013-08-14
101
5.5.3 User Macros
In this menu macro commands for switching, disconnection or user
administration can be created. The macro commands are created for each
user separately.
A macro can execute up to 16 switching commands successively.
The execution of the macros is done via 'Hot Key' and the function keys
<F1>-<F16> (see Chapter 6.1.3, Page 158).
In order to execute user macros the user has to be logged in at the matrix.
You can select between the following settings:
Field Selection Description
Connect
(P1=CON,
P2=CPU) Set bidirectional connection from
console P1 to CPU P2
Connect Video
(P1=CON, P2=
CPU) Set video connection from console P1
to CPU P2
Disconnect
(P1=CON) Disconnect console P1
Logout User Logout current user
Set Real CPU
(P1=VCPU,
P2=RCPU) Assign a virtual CPU to a real CPU
Set Virtual CON
(P1=RCON,
P2=VCON) Assign a real console to a virtual
console
Push (P1=CON) The own KVM connection is forwarded
to console P1 and is changed to a
video only connection.
Function
(01–16)
Push Video
(P1=CON) The video signal of the current
connection (KVM or video only) is
forwarded to console P1. The own
connection remains unchanged (KVM
or video only).