IHSE USA 480c Series Draco tera compact - Manual (Page 177)

Operation
2013-08-14
177
Keyboard Command Description
<‘Hot Key‘>, <s>, <o> Open OSD of the sub matrix in a cascaded
environment
<'Hot Key'>, <Enter> Set a KVM connection (keyboard, mouse and
video) to the selected source (computer, CPU)
<'Hot Key'>, <Space> Set a video only connection to the selected
source (computer, CPU)
<'Hot Key'>, <Left
Shift> + <Enter> Set a Private Mode connection to the selected
source (computer, CPU)
<'Hot Key'>,
<Backspace> Close the current connection of the own
console
<'Hot Key'>, <p> Switch back to the previous connected source
(computer, CPU) with a KVM connection
<'Hot Key'>, <1> ...
<16>, <Enter>
(<Space> or <Left
Shift> + <Enter>) Switch to a source (computer, CPU) stored in
the Favorite List with a KVM connection (video
only or Private-Mode connection)
<'Hot Key'>, <F1> ...
<F16> Execute a predefined macro
<'Hot Key'>, <c>, <new
'Hot Key'-Code>,
<Enter> Change the 'Hot Key' according to the
predefined 'Hot Key' table
<'Hot Key'>, <c>, <0>,
<new 'Hot Key' key >,
<Enter> Define freely selectable 'Hot Key'
<'Hot Key'>, <f>, <new
'Hot Key'-Code>,
<Enter> Change the 'Hot Key' for direct OSD access
according to the predefined 'Hot Key' table
<'Hot Key'>, <f>, <0>,
<new 'Hot Key' key>,
<Enter> Define freely selectable 'Hot Key' for direct
OSD access
<'Hot Key'>, <Num 0> Switching of the USB-HID signal to the own
display (CON Unit with keyboard and mouse)
<'Hot Key'>, <Num 1> Switching of the USB-HID signals to display #1
<'Hot Key'>, <Num 2> Switching of the USB-HID signals to display #2
<'Hot Key'>, <Num 3> Switching of the USB-HID signals to display #3
<'Hot Key'>, <Num 4> Switching of the USB-HID signals to display #4
Pos: 125 /806-IHSE/Technische Daten/UEB_Technische Daten @ 5\mod_1278578165261_6.doc @ 42096 @ 1 @ 1