IHSE USA 480c Series Draco tera compact - Manual (Page 169)

Operation
2013-08-14
169
OSD
 Select Switch in the main menu.
Menu – CON Switch
In order to switch to a local source, proceed as follows:
1. If you are not yet in the menu Switch of the OSD, start Command
Mode with the 'Hot Key' (see Chapter 5.1, Page 51).
2. Press <o> to open OSD.
You will see a list of all available CPUs as a start menu.
3. Switch to the CPU in the list that is called Local CPU.
The switching operation to the local source will be immediately
performed.
The local source (computer, CPU) will be only shown in the OSD, if the
respective CON Unit includes the option for a local connection.