IHSE USA 480c Series Draco tera compact - Manual (Page 162)

Draco tera
162
2013-08-14
Example view Selection list CPU Devices
Activating the automatical Scan Mode for CPU Devices
The matrix offers the possibility to use a scan mode based on the favorite
list of each console or user. The scan mode allows the matrix to switch in
sequence between the CPU Devices in the favorite list within a predefined
time. All scans are performed in video only mode.
For a configuration of the scan mode, Chapter 5.8.1, Page 114.
You have the following possibility to activate the scan mode:
In order to activate the scan mode, proceed as follows:
1. Define a favorite list for the respective CON Device or user (see
Chapter 5.8.4, Page 125 for CON Devices or see Chapter 5.5.2,
Page 98 for users)
2. Start Command Mode with the 'Hot Key' and press <o> to open OSD.
3. Select in the CPU selection list one of the CPU Devices that are
defined in your favorite list.