ikan TL2000HD-CO - Manual (Page 15)

13 18
UMD Setting Mark aspect
SDI
4:3 95%
After entering the MARK interface.
Turn the (BRIGHT) knobto select MARK
and Press it to enter the MARK interface.
MARK ASPECT CAN BE ADJUSTED ONLY BASED
ON MARK WITH ON
Press the (BRIGHT) knob to enter the
main menu, turn the knob to select MARK
and press it to confirm it.
Turn the (BRIGHT) knob to select the
required mark aspect , then press the
(BRIGHT) knob to confirm .
2.35:1 4:3&1.85
4:3&2.35 15:9
DEVICE SYSTEM DEFAULT Is 4:3
Turn the (BRIGHT) knob to select the
ON press the (BRIGHT) knob to confirm
it, then turn the (BRIGHT) item to select the
ASPECT ,press the knob to confirm .
SDI
4:3 95%
SDI
4:3 95%
SDI
4:3 95%
After entering the AUXILIARY SETTING
interface, turn the(BRIGHT) knob to enter the
UMD SETTING , pressthe (BRIGHT)
knob again to confirm.
Press the (BRIGHT) knob to enter the
main menu, turn the knob to select the
AUXILIARY SETTING . Then press the
(BRIGHT) knob to enter AUXILIARY -
SETTING interface.
Turn the (BRIGHT) knob to select the
UMD ON_OFF item , press the knob
to enter the item, then turn the knob to
select
ON , exit UMD setting , UMD
appear on the screen.
DEVICE SYSTEM DEFAULT IS OFF
UMD setting can be made by 12 digitals at
most ,including ENGLISHcharacter, number ,
symbol, turn the (BRIGHT) knob to select
suitable item, and press theknob to confirm ,
after selection , press the (LOCK) key on the
panel to exit the UMD.
------------
SDI
UMD
UMD
HV TALLY
15
SDI
UMD
UMD
HV TALLY
15
------------
SDI
UMD
UMD
HV TALLY
15
RUIGE
SDI
UMD
UMD
HV TALLY
15