ikan TL2000HD-CO - Manual (Page 18)

17 14
Wave Form Safety Setting
SDI
4:3 95%
After entering the MARK interface, Turn
the knob to select the MARK .Then press
the knobto enter the MARK interface.
Press the (BRIGHT) knob to enter the
main menu, turn the knob to select MARK ,
Then press the knob to enter the MARK
interface.
Turn the (BRIGHT) knob to select the
required safety ratio, then press the(BRIGHT)
knob to confirm.
Turn the (BRIGHT) knob to select ON
item,press the (RIGHT) knob to confirm turn
the (BRIGHT)knob to select the
SAFETY
then press the knob to confirm.
SDI
4:3 95%
SDI
4:3 95%
SDI
4:3 95%
Turn the (BRIGHT) knob to select
WAVEFORM and press the knob to
enter the WAVEFORM interface.
WAVEFORM CAN BE ADJUSTED ONLY BASED
ON SDI SIGNAL
Press the (BRIGHT) knob to enter the
main menu and turn the knob to select the
WAVEFORM .Press the knob to enter
the WAVEFORM interface.
DEVICE SYSTEM DEFAULT IS OFF
Turn the (BRIGHT) knob to select the
required WAVEFORM item, press the
(BRIGHT) knob to confirm.
Turn the (BRIGHT) knob to select the
WF POSITION DISP BG SCALE UNIT
SDI
%
SDI
%
SDI
%
SDI
%