ikan TL2000HD-CO - Manual (Page 17)

15 16
Embedded Audio
SDI
4:3 95%
Turn the knob to select the MARK .
Then press the knobto enter the MARK
interface, then turn the knob to select the
ON item,, and press the (BEIGHT) knob
to confirm.
LINE SETTING CAN BE ADJUSTED ONLY BASED ON MARK WITH ON
Press the (BRIGHT) knob to enter the main
menu, turn the knob to select MARK ,
then press the knob to enter the MARK
interface.
DEVICE SYTEM DEFAULT LINE WIDE MIDDLE ,DEVICE
SYTEM DEFAULT LINE COLOR BLUE
Turn the (BRIGHT) knob to select the
LINE WIDE item ,press the knob to enter
LINE WIDE , turn the knob to select the
requiredwide , then press the (BRIGHT)
knob to confirm.
SDI
4:3 95%
SDI
4:3 95%
SDI
4:3 95%
Turn the (BRIGHT) knob to select the
LINE COLOR item ,press the knob to enter
LINE COLOR , turn the knob to select the
required line color , then press the (BRIGHT)
knob to confirm
Turn the knob to select AUDIO DIAPLAY
Then press the knob to enter the AUDIO
DISPLAY interface, turn the knob to select
the
ON item , and press (BRIGHT)knob
to confirm.
AUDIO DISPLAY CAN BE ADJUSTED ONLY BASED ON SDI SIGNAL
Press the (BRGHT) knob to enter the
main menu, turn the knob to select the
AUDIO DISPLAY .Then press the knob
to enter the AUDIO DISPLAY interface.
DEVICE SYSTEM DEFAULT CHANNEL DISPLAY 1-8
DEVICE SYSTEM DEFAULT DISPLAY TYPE HORIZONTAL
Turn the (BRIGHT) knob to selected
CHANNEL DISPLAY item press the knob
to enter the CHANNEL DISPLAY interface
turn the knob to select the required channel,
then press the knob to confirm.
Turn the (BRIGHT) knob to select the
DIS TYPE , then turn the (BRIGHT) knob
to select the required display type, press the
(BRIGHT) knob again to confirm.
Other options setting can refer to the above
SDI
1-8
1 2 -18dB -6dB 1-4CH GROUP SETING GP1
5-8CH GROUP SETING GP2
SDI
1-8
1 2 -18dB
-6dB 1-4CH GROUP SETING GP1
5-8CH GROUP SETING GP2
SDI
1-8
1 2 -18dB -6dB 1-4CH GROUP SETING GP1
5-8CH GROUP SETING GP2
1-8
SDI
1-8
1 2 -18dB -6dB 1-4CH GROUP SETING GP1
5-8CH GROUP SETING GP2
Mark-line Options