ILS ILS22G winXP - Manual (Page 17)

15
The following schematics show how all components work together :
The ILS22Setup wizard is used to determine which peripherals are under direct control of the ILS22, which peripherals
are controlled via external intelligent controllers, which communications settings and command strings are used to address
peripherals and controllers, and whether remote control (for instance via Remote-Q or other controllers) is enabled.
The ILS22Setup wizard is saving all this to the lectern system’s registry.
At start up, ILStranslator will read the registry. If ILS22Setup was not used during installation, ILStranslator will use the
default values. The SOTouch driver determines which glass plate buttons or header were pressed, and passes this on
to ILStranslator. In turn, ILStranslator will ‘translate’ this to embedded system functions or pass it on to attached intelligent
controllers, or react to external controller supplied commands.
The ILS22Setup Wizard will guide you through the possibilities. Each form will show what the default factory setting is.