ILS ILS22G winXP - Manual (Page 3)

1
Congratulations with your ILS22G product.
If you received this product fully integrated and ready to go, launch sho-Q to start presenting.
Sho-Q
To start using sho-Q, you must connect a projector or external display to the ILS22G (VGA connector with converter or
DVI-D connector on the DVI-I socket provided).
You can then start sho-Q presenter and insert presentations, either through setting them ready with sho-Q Planner,
by using sho-Q presenter’s browser (press Manage Presentations, add) or by inserting a USB memory stick with a
Powerpoint presentation that has been exported with sho-Q Pre-processor.
Please refer to the sho-Q user manual.
With all presentations lined up on the sho-Q Presenter selector screen, one touch will start the presentation, simply
pressing next or previous slide, or select from view all slides… staged slides and embedded videos are controlled with
translucent buttons appearing within the current slide view frame, when needed. Better control of videos is offered when
sho-Q’s plug in for inserting video’s and flash files has been used (any sho-Q program automatically inserts Windows
Media Player in Powerpoint)
Sho-Q requires that MS PowerPoint or MS Office 2007 or 2003 has been installed.
Sho-Q is optionally expanded with a system to capture the presentation along with the video image of the presenter in a
virtual studio setting, in order to project the combined image in large auditoria. This is a unique productivity solution as
the XGA signal can stream real time over normal IP lines and be recorded at the same time.
Preparing the ILS22G
Using the right brackets, the ILS22G plateau may have been installed on the Powerlift electrical lift and foot, on the
ILS24 19” lectern cabinet, placed on any table or a custom designed podium.
On the front panel on the right of the DVD unit there is the power on button. After switching on the power, the ILS-logo
in blue must appear on the top left. Do not touch the system until it has finished completely its set up, marked by the fact
that the Room Control and Keyboard buttons are lit. Tap on the monitor field to see of the cursor is picking up your touch.
(When not, see end of next chapter)
Display: the ILS22G includes a 22” wide screen format display with 1680x1050 display resolution. For better reading
in the display panel has been placed “upside down” in the plateau, you may see it start up with a start up screen
that is upside down. The display panel is connected through the LVDS internal connector to the processor for the best
performance and control possible.
In case the display remains displaying upside down, then the INTEL GMA controller has been reset.
Open the display icon in the bottom right task bar tray and set the display at 180°
The operating system display settings must show the second display at its best resolution and set as extended desktop
device. (Right-click anywhere on the display and choose properties form the drop down menu. Select the settings tab.
Select 2nd monitor, set its resolution with the slide bar and tick the extended desktop mark)