ILS ILS22G winXP - Manual (Page 4)

2
SOTouch
The ILS22G is equipped with a very advanced new patented acoustic touch detection system.
Because of this new technology, the design is remarkable: although the entire glass surface responds to touch technology,
there is no need for a bezel. The ILS22G uses regular tempered glass of narrow specifications.
The edges remain clear all around, any spilled water or coffee, any dirty finger marks can be cleaned with a regular
wipe and glass cleaner. Avoid pouring water over the top of the glass where it can seep between glass and aluminum
top with XLR sockets. The system is not entirely water-proof!
The top of the glass has been treated with the finest grain, to avoid that the presenter is looking at his mirror image.
The ILS22G touch implementation uses 2 sensors and detects locations from interference signals generated when the
glass is touched. The calibration process is simple and with this technology – after you are satisfied with the reach of the
touch – you never need to calibrate again.
The touch works with your finger or any object, provided the touch will generates vibrations within the glass.
You can place an object, for example a book, on the surface and the touch calibration remains unaffected.
When you change the resolution of the native screen the calibration is usually not affected, but if the screen ratio is
changed, you may need to re-start the program.
The touch system in static mode is ideally suited for operating the sho-Q Presentation delivery system.
In static mode drag and drop features can be used as well.
We recommend that you use this mode in general operation, but for instant touch needs - such as in presentation delivery
with PowerPoint or sho-Q - we suggest you disable the drag and drop feature.
This is done with a tick mark in the control panel of SO touch and eliminates the slight delay where the system is trying to
understand if a touch is the beginning of a trail or just a touch.
Normally you receive the system with SOtouch pre-loaded