Ivoclar Vivadent CosmoPost - Manual (Page 17)

17
IPS Empress Cosmo Ingot –
Instructions for Use
The dentist takes an impression using the impression posts
and passes the impression on to the dental laboratory.
Model fabrication
– The dental technician must check the accurate fit of the
impression post in the impression by exerting slight
pressure on the post using a suitable instrument.
– Isolate the impression post protruding from the impression
with IPS Empress die material separating liquid. This
prevents the plaster or the model material from bonding
with the impression post.
– Fabricate the master model as usual.
– Make sure that the master model is removed from the
impression in the direction of insertion of the impression
posts.
– Check the accuracy of fit of the impression post on the
completed model.
Instructions for Use
for dental technicians