Ivoclar Vivadent CosmoPost - Manual (Page 22)

22
Cutting of the CosmoPost.
Various views of the post build-up on the model.
Carefully cut the projecting ComoPost.
Finally, the pressed post build-up is finished with fine
diamonds.
Important
– The CosmoPost does not have to be etched with
IPS Ceramic Etching Gel. The post demonstrates a
microstructure that corresponds to that of etched
ceramic.
– The contact surface (Cosmo Ingot) of the post build-up
is conventionally etched with IPS Ceramic Etching Gel.