Ivoclar Vivadent SR Chromasit - Manual (Page 4)

4
Composition
– SR Chromasit Dentin, Creative Dentin
and Opaque Dentin
Ingredients: The monomer matrix consists
of urethane dimethacrylate and deca-
methylene dimethacrylate (34 wt%). The
fillers are highly dispersed silicon dioxide
and copolymers (65 wt%).
Additionally, the material contains
stabilizers, catalysts and pigments
(1 wt%). The total content of inorganic
fillers is 30 wt%, or 13.8 vol%. The
particle size ranges between 5 and 20 nm.
– SR Chromasit Incisal, Creative Incisal
and Transparent
Ingredients: The monomer matrix consists
of urethane dimethacrylate and deca-
methylene dimethacrylate (35 wt%). The
fillers are highly dispersed silicon dioxide
and copolymers (64 wt%).
Additionally, the material contains
stabilizers, catalysts, and pigments
(1 wt%). The total content of inorganic
fillers is 30 wt%, or 13.7 vol%. The
particle size ranges between 5 and 20 nm.
– SR Chromasit Color and Intensive
Ingredients: dimethacrylate
(61.5–63.5 wt%), fillers (33.5–35.5 wt%).
Additional ingredients: stabilizers, catalysts
and pigments (1–4 wt%).
– SR Chromasit Opaquer
Ingredients: copolymers, aluminium oxide,
titanium dioxide, barium sulphate and zinc
oxide (98.5 wt%).
Additional ingredients are catalysts and
pigments (1.5 wt%).
– SR Spectra Opaquer Pink
Ingredients: polymethyl methacrylate and
titanium dioxide (97.5 wt%)
Additional ingredients: catalysts and
pigments (2.5 wt%).
– SR Chromasit Intensive Opaquer
Ingredients: polymethyl methacrylate,
aluminium oxide, titanium dioxide, barium
sulphate and zinc oxide (> 97 wt%).
Additional ingredients: catalysts and
pigments (1–3 wt%).
– SR Chromasit Opaquer Liquid
Ingredients: methyl methacrylate and
urethane dimethacrylate (100 wt%).
– SR Chroma Link
Ingredients: methyl methacrylate
(> 98 wt%)
Additional ingredients: acid ester and
alcohol (< 2 wt%).
Storage
– Storage temperature: 12–28 °C
(54–82 °F)
– Keep packages in use at room
temperature (18–25 °C / 65–77 °F).
– Store SR Chromasit Fluid and SR Link in
the refrigerator (2–8 °C / 36–46 °F).
Once opened, Chromasit Fluid remains
usable for six months, if stored in a
refrigerator. Possible crystal formations
can be dissolved by warming the
material up to room temperature.
– Protect SR Chromasit Fluid from
humidity.
– SR Chromasit Fluid may exhibit a slightly
yellowish tinge after some time.
However, this does not affect the
quality of the Fluid or the veneer.
– Protect the material against direct
sunlight.
– Do not use the material after the expiry
date.
– Keep the materials out of the reach of
children.
– SR Chromasit Fluid
Ingredients: copolymers and benzoyl
peroxide dissolved in diethyl ketone.
– SR Link
Ingredients: bisphenol A-polyethoxy
dimethacrylate, hydrophobic
dimethacrylate, hydrogen phosphate,
solvent and benzoyl peroxide.
– SR Spectrasit Liquid
Ingredients: urethane dimethacrylate and
decamethylene dimethacrylate
(> 99 wt%), catalyst (< 1 wt%).
– SR Spectrasit Gel
Ingredients: glycerine, highly dispersed
silicon dioxide and aluminium oxide.
– Separating Fluid
Ingredients: sodium alginate, sodium
tetraborate, glycerine and pigments in an
aqueous solution.
– Retention Adhesive
Ingredients: copolymers, resin and
softener (30 wt%) dissolved in acetone
(70 wt%).
– Micro- and Macroretention
Ingredients: copolymer (99.5 wt%) and
titanium oxide (0.5 wt%).
– microretention beads: 200–300 microns
– macroretention beads: 400–600 microns