Ivoclar Vivadent VP3 easy - Manual (Page 12)

9.1 Delivery form
Vacuum pump
Operating Instructions
Warranty Card
9.2 Technical data
Power supply: 230 V / 50–60 Hz / 0.4 A
200 V / 50–60 Hz / 0.45 A
115 V / 50–60 Hz / 0.8 A
Tolerated voltage fluctuations: +/– 10%
Power consumption: 70 W
Suction strength: 16 NL / min.
Final vacuum: below 40 mbar
Dimensions: 210 x 140 x 130 mm (length, width, height)
Weight: 3.2 kg
Types of fuses: 230 V: 1.25 AT 250 V
200 V: 1.25 AT 250 V
115 V: 2.0 AT 250 V
Safety information :
The VP3 easy Vacuum Pump complies with the following
guidelines:
– EN 61010, Part 1
– EMV
tested
– Degree of pollution 2
– Excess voltage class II
9.3 Acceptable operating conditions
Ambient temperature range of:
+5 °C to +40 °C (+41 °F to +104 °F)
Acceptable height:
The pump is tested for use at altitudes of up to
2000 m above sea level. Ambient pressure of 500 mbar to
1060 mbar.
9.4 Acceptable transportation conditions
Ambient temperature range of:
-20 °C to +55 °C (-4 °F to +131 °F)
Maximum relative humidity: 80%
This apparatus has been developed for use in dentistry. Setup and
operation should be carried out strictly according to the Operating
Instructions. Liability cannot be accepted for damages resulting from
misuse or failure to observe the Instructions. The user is solely
responsible for testing the apparatus for its suitability for any purpose
not explicitly stated in the Instructions. Descriptions and data
constitute no warranty of attributes.
9. Product Specifications
12
VP easy-BA-WE1.qxd 5.10.2005 11:29 Uhr Seite 12