What if – Ivoclar Vivadent Bluephase User Manual

Page 14

Advertising
background image

14

What if....?

Symbol

Causes

Error Rectification

Electronic defect in the handpiece
or battery

Apparatus is overheated or undercooled

Electronic defect in the battery

Battery empty

Charging contacts contaminated

Battery in safety mode
(integrated protective circuit)

Power pack not connected or defective

Remove and reinsert the battery. If the error remains,
replace the battery with the power pack (Click & Cure).
If the error remains, please contact your dealer or your
local Service Center.

Allow the apparatus to cool down (or assume room
temperature if it is undercooled) and try again after a
certain time. If the error remains, please contact your
dealer or your local Service Center.

Remove and reinsert the battery. If the error remains,
place the apparatus into the charging base.
If the error remains nonetheless, replace the battery
with the power pack (Click & Cure).
Please contact your dealer or your local Service Center.

Position the handpiece in the charging base. „Charg-
ing Battery“ briefly appears in the display before the
display returns to the stand-by mode. If the battery is
not charged, the contacts have to be cleaned. If the
error remains, please contact your dealer or your local
Service Center.

Check if the handpiece has been correctly placed into
the charging base. Clean battery contacts. Information:
“Charging Battery“ briefly appears in the display
before the display returns to the stand-by mode.

If cleaning the battery contacts does not improve the
results, remove the battery from the apparatus. Charge
the battery separately from the handpiece in the
charging base for approx. 10 minutes.
If the error remains, please contact your dealer or your
local Service Center.

Check if the power pack is correctly positioned in the
charging base (also check the charging contacts) or if
the power pack is connected to the power supply by
means of the power cord (display on the power pack
lights up in green if it works correctly).
If the error remains, please contact your dealer or your
local Service Center.

No display

during

charging

LED of the

charging

base is not

illuminated

Advertising
This manual is related to the following products: