Ivoclar Vivadent Multilink Speed - Manual

Multilink Speed
Instructions for Use
Description
Multilink Speed is a self-adhesive, self-curing dental resin cement with light-
curing option for the cementation of indirect restorations made of high-
strength all-ceramic, composite, metal-ceramic and metal. When Multilink
Speed is used, additional dentin bonding agents are not required. The
automix syringe enables a time-saving direct application of the luting
material into the restoration.
Shade
Multilink Speed is available in the shade Translucent.
Working and setting times
The following times apply as soon as Multilink Speed has been dispensed
from the automix syringe (The working and setting times depend on the
ambient temperature):
Attention
After Multilink Speed has been dispensed from the automix syringe, the
setting process can be accelerated by intensive illumination (operating light,
ambient light).
Composition
The monomer matrix is composed of dimethacrylates and acidic monomers.
The inorganic fillers are barium glass, ytterbium trifluoride, co-polymer and
highly dispersed silicon dioxide. Additional contents are catalysts, stabilizers
and colour pigments (< 1%). The primary particle size of the inorganic fillers
is between 0.1µm and 7µm. The mean particle size is 5µm. The total content
of inorganic fillers is approx. 40 vol%.
Indication
Permanent cementation of indirect restorations made of
–
metal and metal-ceramic (inlays, onlays, crowns, bridges, endodontic
posts)
– high-strength all-ceramic: zirconium oxide, lithium disilicate and
aluminium oxide ceramics (crowns, bridges, endodontic posts)
– fibre-reinforced composite (endodontic posts)
Working time
Setting time (without
working time)
At room temperature
23 °C ± 1 °C
150 ± 30 sec
240 ± 60 sec
Intra-orally
37 °C ± 1 °C
110 ± 30 sec
160 ± 40 sec
– Self-adhesive self-curing dental resin cement with light-curing option
– Composite de collage, autopolymérisant avec option photopolymérisation
– Cemento de resina dental autoadhesivo, autopolimerizable con opción de
fotopolimerización
– Compósito de cimentação auto-adesivo, autopolimerizável, com opção
fotopolimerizável
– Difl hekimli ¤ inde kullanılan, kendinden adezif ve kendinden polimerize olan, ıflıklı
polimerizasyon opsiyonlu kompozit siman
– ë‡ÏÓ‡‰„ÂÁË‚Ì˚È, Ò‡ÏÓÚ‚Â‰Â˛˘ËÈ ÒÚÓχÚÓÎӄ˘ÂÒÍËÈ ÍÓÏÔÓÁËÚÌ˚È ˆÂÏÂÌÚ Ò
‰ÓÔÓÎÌËÚÂθÌÓÈ ‚ÓÁÏÓÊÌÓÒÚ¸˛ ÙÓÚÓÔÓÎËÏÂËÁ‡ˆËË
English
Instructions for Use
Mode d’emploi
Instrucciones de Uso
Instruções de Uso
Kullanım Kılavuzu
àÌÒÚÛ͈Ëfl
63
30
53
/1
20
9/
W
E3
/G