Jetway Computer NC9VL - Manual (Page 32)

27
PS2 KB/MS Wake-UP from S3-S5
*This item will only show when ‘ERP Support’ is set as [Disabled].
PS2 KB/MS Wake-UP is affected by ERP Function in S4-S5. Please disable ERP
before activating this function in S4-S5.
The optional settings are: [Disabled]; [Enabled].
WatchDog Timer
The optional settings are: [Disabled]; [Enabled].
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of [10] to [255].
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
WatchDog Wake-up Timer in ERP
The optional settings are: [Disabled]; [Enabled].
This item support WDT wake-up while ERP function is enabled.
When set as [Enabled], the following sub-items shall appear:
WatchDog Timer Value in ERP
The optional setting ranges: [10] ~ [4095] seconds; [1] ~ [4095] minutes.
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
 PC Health Status
Press [Enter] to view hardware health status, set SMARTFAN configuration and
select system shutdown temperature.
 SmartFan Configuration
Use this item to select CPUFAN smart mode and SYSFAN smart mode. When set
as [Enabled], Use can set full-speed temperature, full-speed duty, idle-speed
temperature and idle-speed duty for CPUFAN or SYSFAN specifically.
CPUFAN /SYSFAN Smart Mode
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN Full-Speed Temperature