Jetway Computer NC9VL - Manual (Page 38)

33
display.
The optional settings are: [VBIOS Default]; [DVI]; [HDMI].
Secondary IGFX Boot Display
The optional settings are: [Disabled]; [DVI]; [HDMI].
*The optional setting [HDMI] will only show up when ‘Primary IGFX Boot Display’
is set as [DVI].
DVI to CRT Dongle Support
The optional settings are: [Disabled]; [Enabled].
Active LFP
Use this item to select the Active LEP Configuration.
The optional settings are: [No LVDS]; [LVDS].
When set as [LVDS], use can make further settings in the following 2 items:
LVDS Panel Type:
Use this item to manually select LVDS panel type.
The optional setting are: [640 x 480 18-bit]; [800x 600 18-bit]; [1024 x 600 18-bit];
[1024 x 768 24-bit]; [1280 x 720 18-bit]; [800 x 480 18-bit]; [1366 x 768 18-bit];
[1440 x 900 18-bit]; [1366 x 768 24-bit]; [1440 x 900 24-bit]; [1280 x 1024
24-bit];[1440 x 1050 24-bit]; [1600 x 900 24-bit]; [1680 x 1050 24-bit]; [1600 x 1200
24-bit]; [1920 x 1080 24-bit].
Backlight Control
The optional settings are: [PWM Inverted]; [PWM Normal]; [GMBus Inverted];
[GMBus Normal].
 Memory Configuration
This item is for user to press [Enter] to view current memory configuration.