Kanguru USB Copy Pro - Manual (Page 9)

9
3.3 Copy Files
Your destination devices will appear as USB icons in the bottom window. The USB icons will be the
color grey, indicating that they are ready to be written to.
1. Click on the Start Copy button to begin copying your files/folders to the selected USB devices.
Note: Your files and folders will be copied to two USB devices at a time.
2. When a device is being written to, its USB icon will turn yellow. The USB icon will turn green
when the copy process completes successfully.
Caution! Do not disconnect a drive while it is being written to. Doing so may result in data
corruption or damage to the drive.
3. Any devices that fail to complete the copy process will turn red, indicating that there was an
error during the copy process. Click on the Show Error Details button to view a summary of
errors.
Note: If you want to run the same copy process on a new batch of devices after the current copy
process has completed:
1. Disconnect your USB devices and then connect new destination devices.
2. Click on the ‘2 Select Destination’ button
3. Select your new destination devices
4. Proceed with the copy process as normal
Copy Files