Temperature selection knob, Water level knob – Kleenmaid KFL1506 12 programs User Manual

Page 12

Advertising
background image

14

Temperature Selection
Knob

This knob is used to select the
washing temperature, from 30°

C to 95°C. Numbers on the knob are
degrees Celsius.
Temperature is selected by turning the
knob clockwise from 95°C and
backwards.

Correctly selected washing temperature
will help you make energy savings.

Economy Programme

Programme B is energy saving
programme. All you have to do
is select the temperature lower

than the 95°C for washing white
laundry. The washing cycle is the same
as for 95°C.

IMPORTANT!
This will help you make up to 40%
energy savings.

Cold Wash

On the snow-flake position all
heaters for heating water are
switched off, but the washing

programme is the same as in the water
heaters were on.

Water Level Knob

This knob is used to select the
water level on all programmes.
Settings on the knob are

marked with numbers from 1 to 5. The
quantity of water is selected by turning
the knob clockwise, from the lowest
setting "1" towards the highest setting
"5" and backwards.

- We recommend setting "1" for lightly

soiled laundry or for smaller
amounts of laundry.

- We recommend setting "2" for

normally soiled resistant and
permanent press laundry.

- We recommend higher settings for

washing heavy soiled laundry,
where you add more washing agent
or when water is very soft, which
means that rinsing of the washing
agent from the laundry is not so
efficient, therefore more water is
required.

- We also recommend higher water

level where water pressure is low.

- Water level cannot be changed for

the programmes for pre-wash and
woollens.

NOTE
In order to make easier decision some
approximate water quantities are stated
for individual settings and normal water
pressure.

Advertising
This manual is related to the following products: