Kleenmaid KFL1506 12 programs - Manual (Page 21)

2 3
Cabinet, Cabinet control
and Top Panel
Clean the outside of your washing
machine with a soft cloth and mild
detergent. Do not use coarse cleaning
agents which could damage the
surface.
Drum Interior
As a result of inadequate washing,
greasy clots may appear on the drum
rubber, door gasket or even on the
laundry. Remove them as follows:
Prepare a solution of 3/4 - 1 kg of
washing soda (calcified soda) and 1
litre of cold water. Pour the solution
through the dispenser, set the control
knob to programme B and set
temperature to 95°C (where fitted).
When this programme is finished, your
washing machine is ready for use.
Dispenser
Inspect the dispenser after each wash.
If there is a residue of washing powder,
clean it. Pull it out of the machine, clean
it with a brush and warm water, and dry
it.
If necessary clean the interior of the
detergent dispenser casing, in case you
detect the remainings of washing
powder inside.
Wire Net in the Inlet Hose
The wire net in the inlet hose should be
frequently cleaned.
Turn off the tap and remove the inlet
hose. Clean the net under a tap,
replace it and fix the inlet hose.
Door Gasket
Wipe the rubber door gasket after each
wash; the gasket will last much longer.
11. Cleaning and Maintenance