Kleenmaid KFL1506 12 programs - Manual (Page 23)

During operation, malfunctions may
occur that can be easily eliminated. For
more serious defects please phone
your nearest service centre.
1. The machine doesn't operate (the
control lamp is off).
2. Water is not pumped into the
machine.
3. The machine jumps during
operation.
4. The machine is leaking.
5. The wash load is too wet.
6. Too much bubbling during
washing.
7. Washing was not efficient (stains,
greasy clots).
8. Laundry is not well rinsed (wash
powder residue).
Check the power supply and fuses.
Is the plug correctly placed in the
socket.
Is the machine switched on?
Are the taps turned on?
Is the wire-net filter on the inlet hose
clean?
Is the door closed?
Are the transport rods removed?
Is the machine correctly levelled? (if
not, use the adjustable legs).
Check the load (perhaps you are
washing only one large item).
Is the pump guard properly fixed?
Is the inlet hose properly secured to the
tap and to the machine?
Is the pump guard clean (free of solid
particles)?
Is the spin speed on the correct
setting?
Check whether the wall siphon drain is
clogged (clean it).
Check the water hardness and reduce
the quantity of washing powder you are
using.
Have you chosen the correct wash
programme? Use larger quantities of
washing powder for heavily soiled
laundry, or wash smaller loads.
Is the pump guard clean (free of solid
particles)?
Perhaps you overloaded the machine
(especially delicate fabrics) and used
too much washing powder.
12. Trouble-Shooting Guide
Check whether the wall siphon drain is
clogged (clean it).