Kleenmaid KFL1506 12 programs - Manual (Page 22)

2 4
Pump guard
The pump guard is located under the
cap at the bottom of the machine.
If you use the machine correctly, there
is no need to clean the guard.
If you have to open and clean the filter,
ensure you have pumped the water out
of the machine. The best method to do
that is to place the outlet hose as low
as possible (near the floor).
- Remove the cover (with coin inserted
into the notch).
fig.1
- Place a shallow pan underneath to
allow the excess water to pour out.
Remove the guard, by turning it anti-
clockwise (35-40°).
- Insert the funnel attached to the
machine into the bottom cut-outs
between the filter cover and cabinet
and fix it by turning clockwise.
fig.2
- Replace the guard in reverse order.