Kleenmaid KFL1506 12 programs - Manual (Page 15)

17
• Separate clothes and load a suitable
amount -refer - Tables of Washing
Programmes (pages 18-19).
• Close the door (push it towards the
machine).
• Check the water inlet and outlet.
• Choose the right programme.
• If your machine is equipped with
option switches, use them where
appropriate.
• Select the washing temperature and
spinning speed, if your machine is
equipped with this option.
• Switch the machine on.
After Washing
• Switch off the machine (the control
lamp turns off).
• Check that the washing is finished
and that the water is pumped out of
the machine to avoid unnecessary
flooding. If there is still water in the
machine, select one of the
programmes for pumping or spinning.
• There is a safety switch on the door.
This means that you have to wait two
minutes before you can open the
door at the completion of the wash
cycle.
• Take the laundry out of the machine
and turn the drum once or twice with
your hand to make sure it is really
empty.
• Check the rubber gasket on the door
and remove objects that may have
deposited (buttons, pins etc.)
• Leave the door open and allow the
interior to dry
• Disengage the options buttons
(where fitted).
• Turn off the taps.
• Check the dispenser and clean it if
necessary and dry it well.
• Every now and then, clean and
check the pump guard (refer
page 25).
8.Prepare your machine for washing