Motorola DM 3400-3401 - Manual (Page 14)

Rec
e
iv
ing and Mak
ing Call
s
English
9
Receiving and Responding to a Group Call
To receive a call from a group of users, your radio must be
configured as part of that group.
Procedure:
When you receive a Group Call:
1 The green LED blinks.
2 Press the PTT button to respond to the call. The green LED
lights up.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
4 Release the PTT button to listen.
5 If there is no voice activity for a predetermined period of
time, the call ends.
See Making a Group Call on page 10 for details on making a
Group Call.
Receiving and Responding to a Private Call
A Private Call is a call from an individual radio to another
individual radio.
There are two types of Private Calls. The first type, where a
radio presence check is performed prior to setting up the call,
while the other sets up the call immediately.
When your radio is checked, the yellow LED lights up
momentarily. Only one of these call types can be programmed
to your radio by your dealer.
Procedure:
When you receive a private call:
1 Depending on how your radio is programmed:
The yellow LED lights up momentarily. Then, the green LED
blinks.
OR
The green LED blinks.
2 Press the PTT button to respond to the call. The green LED
lights up.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
75D05-A.book Page 9 Wednesday, January 3, 2007 12:51 PM