Motorola DM 3400-3401 - Manual (Page 16)

Rec
e
iv
ing and Mak
ing Call
s
English
11
Making a Private Call
Procedure:
1 Press the Channel Rocker to select the channel with the
active subscriber ID.
2 Press the PTT button to make the call. The green LED lights
up.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
4 Release the PTT button to listen. When the target radio
responds, the green LED blinks.
5 If there is no voice activity for a predetermined period of
time, the call ends.
6 You hear a short tone.
Making an All Call
This feature allows you to transmit to all users on the channel.
Your radio must be programmed to allow you to use this feature.
Procedure:
1 Press the Channel Rocker to select the channel with the
active All Call group ID.
2 Press the PTT button to make the call. The green LED lights
up.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
Users on the channel cannot respond to an All Call.
Making a Group or Private Call with the One Touch
Call Button
The One Touch Call feature allows you to make a Group or
Private Call to a predefined ID easily. This feature can be
assigned to a short or long programmable button press.
You can ONLY have one ID assigned to a One Touch Call
button. Your radio can have multiple One Touch Call buttons
programmed.
Procedure:
1 Press the preprogrammed One Touch Call button to make
a Group or Private Call to the predefined ID.
2 Press the PTT button to make the call. The green LED lights
up.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
4 Release the PTT button to listen. When the target radio
responds, the green LED blinks.
5 If there is no voice activity for a predetermined period of
time, the call ends.
For a Private Call, you hear a short tone when the call ends.
75D05-A.book Page 11 Wednesday, January 3, 2007 12:51 PM