La Crosse Technology WS-2510 - Manual (Page 24)

24
3.4.4. Alarm initiation, Alarm reset
-
If the measured value exceeds or falls below one of the set alarm values, the display will go off and the alarm value in
question together with the text “ALARM” and the appropriate high or low deviation (MAX or MIN) will be displayed. At
the same time, an intermittent alarm tone will sound.
- In addition, the point in time at which the alarm occurred will be shown in the time of day field so that it is also possible
to establish this time later.
- The alarm is reset using the “RESET” key.
Display example 1:
Alarm from outdoor sensor 3 on falling below -12 °C, time of alarm Monday, 10.8. at 10:53 AM.
Display example 2:
Wake-up on Thursday, 24.11*., 6:30 AM * - Wake-up occurs every Thursday.