D-Link DES-3225G - Manual (Page 155)

24-port NWay Ethernet Switch User’s Guide
Web-Based Network Management 145
Change Configuration File
Figure 7-46. Change Configuration File window
To change a configuration file, fill the fields in above and then click Apply.
The information is described as follows:
♦ Software Update Mode is Set to either Network or SLIP. Determines whether the configuration file should
be obtained through the Ethernet network or through the console port.
♦ TFTP Server Address is The IP address of the TFTP server where the configuration file is.
♦ File Download Determines whether or not the Switch should download its configuration file the next time it
is booted.
♦ File Name The path and configuration name on the TFTP server.