D-Link DES-3225G - Manual (Page 63)

24-port NWay Ethernet Switch User’s Guide
Using the Console Interface 53
Figure 6-25. Add/Remove IGMP Entry screen
The above screen is used to specify an agent to interface between IGMP and VLAN. The agents are assigned to a VLAN
and allow IGMP query and report packets to be present on the given VLAN. Only 12 agents can exist on the Switch at any
one time.
Items in the above screen are described below:
♦ Action Adds/Removes an entry (agent) from the table.
♦ VID The VLAN number that you wish to create an agent for.
Go back to the Configure 802.1Q IGMP screen and choose Configure IGMP Control Table (shown below) in order
to activate or deactivate the agents and configure settings for them.